[Top] [All Lists]

Re: Braking Problem

Subject: Re: Braking Problem
From: (Graham McCann)
Date: Tue, 15 Aug 1995 10:44:18 +1000

You can check that the servo is working by putting your foot firmly on the
brake pedal and then starting the engine.  The pedal should go down slightly
as the vacuum builds up and takes over some of the effort from your foot.
Overall I think a brake bleed would be a good ides, if possible take it to a
brake specialist and have him pressure bleed the system.  For the small
charge involved the result will be much better.


Graham McCann  Rivett, ACT. Australia
06 2889055

<Prev in Thread] Current Thread [Next in Thread>