[Top] [All Lists]

Re: differential draining and refilling

To: James Fischer <>
Subject: Re: differential draining and refilling
From: "U. Goettsch" <>
Date: Mon, 15 Jan 1996 16:43:13 -0800 (PST)
On Mon, 15 Jan 1996, James Fischer wrote:
>     Using a standard 3/8" inch wrench with an adapter for 1/2" drive
>     sockets works like a champ on Midgets.  The adapter is a square
>     gizmo, and it fits the square hole in the fill/drain plugs 
>     perfectly.  The other good news is that you can put the adapter
>     on the end of an extension to keep your wrench (and hand) away
>     from the oil that tends to spurt out when removing a drain plug.
>     The transmission fill plug is identical, at least on my Midget. 

On my 67, the size is between 3/8 and 1/2. 7/16" ?
                     __/__,__         ________/____,,_______
................... (_o____o_) ..... (___ O _________ O ___/ .............. 
                      sprite                 caddy 

<Prev in Thread] Current Thread [Next in Thread>