[Top] [All Lists]

Re: Engine Bearing Replacement?

To: mgs@Autox.Team.Net
Subject: Re: Engine Bearing Replacement?
From: Chad Cooper <>
Date: Sun, 31 Aug 1997 10:21:12 -0500
Arthur Pfenninger wrote:Warren,
I replaced those bearings without pulling the engine, just takes
patience.  The motor mounts have to be loosened so you can get the pan
off, other than that it was no big deal.
>         It may as simple as your oil pressure relief valve being bad. It's
> a cheap fix. Per my previous post you can't replace the main bearings
> without pulling the engine. You need to remove the crank shaft to get the
> top of the bearings out, not to mention how hard it would be to try and
> pull the caps off while laying on your back.
> ...Art

<Prev in Thread] Current Thread [Next in Thread>