mgs
[Top] [All Lists]

Re: Starting a rebuilt MGA 1500 (Continued) - Getting Oil Pressure

To: RatiganJ@aol.com
Subject: Re: Starting a rebuilt MGA 1500 (Continued) - Getting Oil Pressure
From: bugide@juno.com (Larry Dickstein)
Date: Sun, 14 Sep 1997 09:26:01 EDT
Joe-
        I've never used lithium grease for this purpose so I don't know
if that might be the problem.  I've always used Vaseline and it works
fine.  I'm not familiar enough w/ the MGA'a but on B's, I have always
filled the oil filter and cranked w/ the plugs removed and it takes about
45 seconds.

Larry Dickstein
bugide@juno.com

On Sat, 13 Sep 1997 22:23:16 -0400 (EDT) RatiganJ@aol.com writes:
>Fellow Listers...
>
>     Recently I put a few postings to the list regarding the fact that 
>I
>could not get my starter to turn over my rebuilt MGA 1500.  Thanks to 
>the
>wisdom of the listers, I got past that problem and now, the starter 
>will turn
>over the engine rather easily.
>
>     I now have the next challenge - getting oil pressure.  I am 
>having some
>trouble and thought I should ask for some help before going too far.
>
>     When I rebuilt the engine (acutally had the short block 
>professionally
>rebuilt and I put on the assessories, such as the oil pump), I packed 
>the new
>oil pump with white lithium grease to hopefully aid in the priming.
>
>     In my pursuit of oil pressure, I removed the plugs, and ran the 
>starter
>for a minute or so.  No oil pressure.  I then disconnected the hose 
>that goes
>to the oil pressure gauge and used a syrenge to put about a pint or so 
>of oil
>into the engine via this route.  I also pushed the car backwards in 
>4th gear
>to try and get the oil pump to suck some oil.  Turned the engine over 
>with
>the starter for about a minute.  No oil pressure.
>
>     I am a bit of a loss at this point.  Maybe I did not push the car
>backwards far enough in fourth - I only went 10 or 20 feet.  Maybe I 
>should
>not have put lithium grease into the new oil pump when I put it into 
>the
>engine.
>
>     Does anyone have any sugestions on things I should do or check?  
>I
>really hate to pull off the pan and the oil pump if there are other 
>things I
>could check first.  Maybe my oil pressure relief valve is stuck open 
>(how
>that might happen, I do not know).
>
>     Anyway, as one can see, I need help...
>
>     Thanks in advance...
>
>     Joe Ratigan
>     58 Roadster that really wants to run, if it only could  
>

<Prev in Thread] Current Thread [Next in Thread>