Yes, this is a better idea. Whichever method you employ, be scrupulous
about cleanliness as dirt in the system can turn Rack & Pinion into Rack
On 18 Nov 1997 11:33:39 -0600 "A. B. Bonds" <firstname.lastname@example.org>
>In <19971118.093209.17775.8.MGBOB@juno.com>, ROBERT G. HOWARD wrote:
>> If you need to replenish gear oil on a car that lacks the grease
>>fitting, it's necessary to remove the Yoke Cover Plate, its shims,
>>yoke inside, the spring, the damper pad and then to pour in the oil.
>You can also (much more easily) cadge a 50 cc syringe and a short
>length of tubing and slip the juice in under the rubber bellows. Just
>loosen the clamp holding the rack side on.
> A. B. Bonds