|Subject:||Re: Fuel sending gage|
|From:||RAY WYGONIK <RWYGONIK@grove.iup.edu>|
|Date:||Mon, 08 Jun 1998 08:06:14 -0400 (EDT)|
The second terminal is probably for a ground. Check if it is attached directly to the plate holding the sending unit in. The wiring diagram shows a wire to ground. My 74B has a ground terminal. someone replied there should only be one terminal, theirs may have just broken off. With the way the mounting plate locks in you probably get a good ground, but I'd run a extra wire to ground for good measure.
|<Prev in Thread]||Current Thread||[Next in Thread>|