mgs
[Top] [All Lists]

Re: more on the Thanksgiving debacle

To: "Gaetke" <gaetke@ix.netcom.com>, <mgs@Autox.Team.Net>
Subject: Re: more on the Thanksgiving debacle
From: "Penny & Bill Meyer" <pplusb@northlink.com>
Date: Sat, 2 Jan 1999 11:40:15 -0700
  I plan on using a chain
>wrapped around the studs the valve cover anchors to, with some big washers
>and nuts on top, then hook that to the hoist.  That is the method of choice
>isn't it?

Don't know about the majority's choice, but what I use is 3/4" rope run
convenitently under projections ay the front and rear of the engine.  When
balancing or tilting for removal/replacement, the rope slides nicely through
the hook on the engine hoist.

Bill


<Prev in Thread] Current Thread [Next in Thread>