Hello All.
Been looking at costs to rebuild the motor in my special Tuning B.
Seemingly, the best thing to do is go with a stock short engine and rebuild
my own head, doing the unleaded thing at the same time.
According to the Pluspac S info I have, the engine is standard apart from
the cam. So, Does anyone know where I can get one, or find an equivalent
(e.g. Kent, Piper, etc.). Specs as follows....
Cam: C-AEH 864
Lift: 0.252" (6.35 mm)
Inlet: opens 36 deg. BTDC, closes 52 deg ABDC
Exhaust: opens 56 deg. BBDC, closes 32 deg. ATDC
Also, the head is listed as a C-AHT 100A, 35cc unit. The gasket is a C-AEH
768. Any ideas as to an equivalent for this gasket?
Many thanks,
Dave Hill, UK.
Can I Telework for you? See what I do, at...
http://www.angelfire.com/biz4/davtel/index.html
Troubled by a phobia? Know someone who has one? Go to...
http://www.angelfire.com/de/ukphobias/index.html
|