> When installing the new studs you should be aware that these
> threaded holes (the four in the middle not the two on the ends) go
> through into the verticle holes for the head studs. As such, you
> should apply thread sealant to the threads of the manifold studs
> before installation to prevent oil from weeping out onto the
> exhaust manifold.
WOW ... I never realized this ... Barney, thanks again for the
excellent tid bits of info!
Larry Unger
'61 MGA 1600 MkII
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|