mgs
[Top] [All Lists]

Re: Low oil pressure after rebuild

To: "Dodd, Kelvin" <doddk@mossmotors.com>
Subject: Re: Low oil pressure after rebuild
From: mg-dennis@mindspring.com
Date: Mon, 10 Sep 2001 18:38:17 -0700
I had thought of this and asked him which gasket he had left over.  He said the
small one is left.  I think we have the right gasket under the pump.  I need to
get over to see for myself.  I have an old Jager white faced oil gauge.  I
threaded it onto the flex line off the engine on my car and it read exactly the
same as the gauge on my dash.  I'll get over to Chucks and verify his gauge
hopefully tomorrow.

"Dodd, Kelvin" wrote:

>  A common mistake is to use the earlier gasket on the 5
> main oil pump.
>
>         See if you have a left over 3 bolt gasket from your set.  If you do
> have the left over gasket and access to a fax machine, I can fax you a
> picture of the correct gasket.

///
///  mgs@autox.team.net mailing list
///  (If they are dupes, this trailer may also catch them.)


<Prev in Thread] Current Thread [Next in Thread>