Teach some, learn some.
all the best
> Kelvin -
> Thanks! Learn somethin' new every day...
> Chris K.
> > Chris:
> > The Z Maggot brake casting is similar to the MGA, but has BSF port
> > You can install an MGA cylinder assembly, but as you say the guts
> have to be
> > reversed, and you must use one SAE banjo bolt, and one SAE line
> > Both bits are available.
> > Kelvin.
> > > Larry -
> > >
> > > Yes. The fronts are the same as on the front-drum MGA, too. The
> > > master cylinder is different (same casting, but the brake and
> > > bores are reversed), but the MGA rebuild kit works fine.
> > >
> > > HTH
> > > Chris K.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive