You first have to find out for sure where the squeal is coming from.
An inch slack in the belt ios too much, get it down to about 1/2 inch.
Still squealing?
If squeals with the belt on, use a stethescope if you have one. If not, take a
long screwdrive, place on end on the alterantor, and listen to the other. Do
the same with the water pump. It should be apparent where the squeal is coming
from.
No help? take the belt off. run the engine (briefly) and listen. No squeal ,
good, but you missed something before. Squeal, bad, eninge problem.
Maynard
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|