I'm going to have to dig out a B head gasket. Don't know if it can be
done. Sounds good if it can be.
"Ehinger, Nick (N.)" wrote:
> One of the other things you may want to do is to build up the head gasket. I
> have a jig I use for the 948 engines I ran. If you peal back the copper fold
> around the cylinder holes and lay in some additional .005 inch copper wire,
> the heads will handle the increased pressure much better.
> Nick Ehinger
> -----Original Message-----
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive