Hello people;
Sure could use some help here.
It's an MGA - Too much up/down & sideways play in the steering wheel from
worn felt bushes. It's apart, I've got the new bushes and am ready to
install them between the steering shaft and the outer (steering column)
tube.
I can see it's going to take some ingenuity. If anyone's done this job and
has figured a way to get those bushes compressed around the steering shaft
enough to clear the space between the shaft and the outer tube while
re-introducing the shaft back into the outer tube, I'd sure like to hear it.
:) Thanks..
-Rick
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|