Re: Seats

[Charles & Peggy Robinson <ccrobins@ktc.com>]

GoodONya Jim,

   Thanks for sharing that trick.  Always glad to see some ingenuity.

    CR



James Kleemeyer wrote:
> When I put the new carpet in my 74 B I had an idea that worked for me. I
> made studs by cutting the heads off of bolts and then cut screwdriver slots
> in the ends. Put the "studs" in the floor, set the packing strips and
> washers in place and set the seat down over the studs. Take out the studs
> and put the bolts back in. Makes a pretty easy job of it.
> 
> Jim K