Listers,
I've had both tube and lever. For daily driving, even spirited driving, the
originals rebuilt are safer and just as good as tube. Have you really looked
how the tube shocks are engineered for these cars? It's scary as far as I'm
concerned. Just my $.02
Jim
69C original tubes in front up rated levers in rear.
70B has had tube front and rear. Front tube bolts have snapped twice over 3
years. Switched to rebuilt levers front and rear. Peace of mind.
----- Original Message -----
From: Max Heim<mailto:max_heim@sbcglobal.net>
To: MG List<mailto:mgs@autox.team.net>
Sent: Tuesday, September 06, 2005 10:17 PM
Subject: Re: WWA
"...wasn't engineered for it" is a pretty vague reason... I mean, most MGs
weren't engineered for radial tires, either, but that doesn't stop folks
from fitting them, and for good reasons.
That said, I don't think there's a whole lot of benefit in the conversion
for street driving, since it's not like you can buy tube shocks
"customized"
to this non-standard application -- you wind up using shocks designed for
some other vehicle. If you really understood the parameters, I imagine you
could come up with a superior solution to the stock levers, just like you
could come up with a superior solution to the stock tube shocks on your
Golf
or your Saab. But how superior? and would it be worth the effort/$$$?
I can say this, having done the tube shock conversion when the total cost
of
the front and rear kits was less than the cost of two replacement lever
shocks. It worked, but it's hard to say whether it was an improvement -- I
could only compare to 4 leaky, worn-out lever shocks.
--
Max Heim
'66 MGB GHN3L76149
If you're near Mountain View, CA,
it's the primer red one with chrome wires
on 9/6/05 6:22 PM, S. Allen at
scottallen3663@gmail.com<mailto:scottallen3663@gmail.com> wrote:
> Can I throw in my 2p?
>
> First I've had it on very good authority, (my father who is a second
> generation MG owner) that the tube shock conversions were not to be done
> simply because the car wasn't engineered for it, and on LBC's you don't
want
> to travel too far afield in doing things they weren't designed for. I
mean,
> there's no shock tower to start with...
>
> Next I'd like to agree with Ed regarding WWA. I had them do the front
> dampers on my TD and while they had them I got called up for the
> unpleasantness in Iraq. They took care of me while I was gone and as far
as
> I'm concerned enthusiasts can't send enough business their way.
>
> Like I said, my 2p.
>
> Scott Allen
> 74 1/2 BGT
> 52 TD
|