On 2/11/07, Thomas L. Burgin <tburgin1@cox.net> wrote:
>
> I changed my 1980 MGB to SU AUD 135". The rear filter next to the
> power brake is rubbing the cone filter. I have been told that this
> is the correct filter by two persons. I have done everything I could
> to keep it from touching the brake. The engine mount seem to be
> good. Has anyone solved this problem? The cone gives good air but I
> don't like the two rubbing.
Thomas,
I had the same problem on my 79. I just creased the stainless mesh where the
booster rubbed and it has been fine for several years. It only takes a
slight indentation to clear. I have new engine mounts also.
Monte
--
Monte and Jane Morris
1967 MGB, British Racing Green
1979 MGB, Carmine, Duel HIF's
http://picasaweb.google.com/montejane/MGS/photo#5001948439113957394
|