[Top] [All Lists]

Re: [Mgs] Rev gear Replacment

To: "'Paul Osborne'" <>, <>
Subject: Re: [Mgs] Rev gear Replacment
From: "Chad Cooper" <>
Date: Wed, 17 Oct 2007 17:46:21 -0500
The overdrive unit really doesn't affect anything, it slides off as a whole
unit.   Replacing reverse will require disassembly of the transmission.  So
while you are in there I would plan on replacing the synchros and any
bushings or bearings that look bad.  The tranny is kind of a puzzle and it
can only be assembled in order.  Just take your time and pay attention to
the instructions in the Bentley manual and you will be ok.



-----Original Message-----
[] On Behalf Of Paul
Sent: Wednesday, October 17, 2007 7:16 AM
Subject: [Mgs] Rev gear Replacment

How difficult is it to replace the rev gear in a B overdrive transmission?
Paul Osborne
University of Rochester
Engineering & Technical Services
Department of Electrical and Computer Engineering
201 Hopeman Bldg River Campus
Rochester, New York 14627

Edit your replies

<Prev in Thread] Current Thread [Next in Thread>