Check out John Twist's latest youtube video. He show you how to
figure out which values are bad.
Search for University Motors.
On Jan 4, 2008, at 10:24 AM, Rick Lindsay wrote:
> Woohoooo! Almost weekend here in the Western
> hemisphere!
>
> Last evening my gasket head-set arrived for the MGB so
> I am ready to get after the valves. Weather in
> Houston promises to be in the 70s, mid-day, so the
> garage will be just toasty.
>
> My quest will be to discover how and where the #2
> cylinder's valve(s) are leaking. The pressure is down
> to about 105psi from the 135 average value on the
> other cylinders. (The other three cylinders are
> within 1psi of the same pressure!) Given that the
> pressure drop on #2 is not huge - bad yes but not
> terrible - I'm hoping that I'll be able to just lap
> the existing valves onto their seats and solve the
> problem. So the message is that I'm going to try to
> spend some 'quality time' in the garage this weekend.
> I plan to photograph everything, before and after, as
> is usual for me. If interested, look for an update
> perhaps tonight and throughout the weekend.
>
> regards,
> Rick
> '70 MGB
> other stuff
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
>
> You are subscribed as ptrmgb@gmail.com
>
>
> Mgs@autox.team.net
> http://autox.team.net/mailman/listinfo/mgs
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
http://www.team.net/archive
|