Grant,
There are several different versions of the NAPCO front axle. The NAPCO
kit included the front axle and T-case plus all the necessary bolt on's to
make it work. You mention a "set" of NAPCO axles. If original, the rear
you're looking at is the stock 59' rear end. Nothing special, or NAPCO
specific about it. That front axle is the special part, and was matched
(ratio-wise) to the stock rear axle of the vehicle.
AD conversions were only available in 3/4 ton or better as the enclosed
driveline of the half tons made the conversion a no-go. The price sounds
fair, depending on the condition of the Rzeppa joints in the front axle.
Please let me know if you have any further questions.
mailto:oletwuk@amaze.net
Yours, Kevin P.
59' Apache 38/NAPCO
The NAPCO Owners Group
-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net]On Behalf Of Grant Galbraith
Sent: Friday, October 29, 1999 5:07 PM
To: oletrucks
Subject: [oletrucks] Napco Axles
Found a set of Napco axles from a '59 GMC today. Seller wants 400 for
both. Are these different from the AD Napco axles? Is the price about
right?
Thanks,
Grant 50 3100
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|