An epoxy or urethane primer will keep away rust for years.
----- Original Message -----
From: <GremlinGTs@aol.com>
To: <oletrucks@autox.team.net>
Sent: Thursday, March 16, 2000 3:48 PM
Subject: [oletrucks] Re: Was.. DA Sanders & Updates, now Primer/Rust
forming...
> In the OLD days, the primers absorbed moisture, so you didn't want to run
> the car around all the time with just primer .... however, there are now
some
> hardy primers that are so tough,some of the 'Rodders are using these
special
> red, black, or grey semi-gloss primers as the final coat, as they like the
> semi-gloss aspect alot! And they won't absorb moisture, either, so they're
> safe to leave " as is ". I'm not a painter, and don't remember the
specific
> name of these primers, but you could go that route if you wanted to. I do
> believe that you have to take special care cleaning the paint guns, as
this
> stuff will dry and clog your gun orifices if you don't clean it thoroughly
> after using it! As usual, check with an expert before using. :)
>
> Jerry Casper
> non-expert new home/garage owner with YEARs of non-experience.
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|