[Top] [All Lists]

Fwd: [oletrucks] Door gasket

To: oletrucks@Autox.Team.Net
Subject: Fwd: [oletrucks] Door gasket
From: PJMONES@aol.com
Date: Sun, 14 May 2000 20:53:22 EDT

Smokey, first cut off a small 6 inch section of the new cab lace (door 
gasket) and run it through the track to make sure there are no tight spots. 
If you find a problem spot, bend it back into shape.  Next spray the track 
and the rubber gasket with Armor-All. I found this worked better than liquid 
soap or silicone.  Also, if you plan on putting in a new headliner you should 
put the headliner in first, then the cab lace.

53 - 3600
"Ole Betsy"

Content-Disposition: inline

Return-Path: <oletrucks-owner@autox.team.net>
Received: from  rly-yc05.mx.aol.com (rly-yc05.mail.aol.com []) by 
air-yc03.mail.aol.com (v73.12) with ESMTP; Sat, 13 May 2000 13:12:16 -0400
Received: from  teamfat2.dsl.aros.net (teamfat2.dsl.aros.net []) 
by rly-yc05.mx.aol.com (v71.10) with ESMTP; Sat, 13 May 2000 13:12:02 -0400
Received: (from majordom@localhost)
        by teamfat2.dsl.aros.net (8.9.3/8.9.3) id LAA07653
        for oletrucks-actors; Sat, 13 May 2000 11:08:33 -0600 (MDT)
Message-ID: <000301bfbcfc$97d89fc0$440056d8@home>
From: "Charles Culver" <sculver@iwl.net>
To: "oletrucks list" <oletrucks@Autox.Team.Net>
Subject: [oletrucks] Door gasket
Date: Sat, 13 May 2000 11:59:19 -0500
MIME-Version: 1.0
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 4.72.3110.1
X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3
Sender: owner-oletrucks@Autox.Team.Net
Precedence: bulk
Reply-To: "Charles Culver" <sculver@iwl.net>

How in the heck do you get the rubber door gasket to go in the groove?

This is whipping me!


Smokey Culver
'50 3600 5-window (mine) 
'56 3600 (hers)
League City, Texas 

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>