oletrucks
[Top] [All Lists]

Re: [oletrucks] Gas Tank Coating

To: <Mikerross@aol.com>
Subject: Re: [oletrucks] Gas Tank Coating
From: "Jon Kunkel" <jonkunkel@home.com>
Date: Sun, 16 Jul 2000 09:26:13 -0500
Mike,
I used the kit from Eastwood Co.  They supply a chain which is what I used
to loosen all the remaining rust and debris.  It did an excellent job.  I
don't see a problem with the smooth pebbles except if they break up.
Jon 50 3100
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
----- Original Message -----
From: <Mikerross@aol.com>
To: <ADvent@thuntek.net>
Cc: <oletrucks@autox.team.net>
Sent: Sunday, July 16, 2000 8:13 AM
Subject: [oletrucks] Gas Tank Coating


> Guys I am in the process of coating the inside of my trucks gas tank.  I
was
> amazed at all the rust and junk that came out of the tank.  Has anyone
used a
> gas tank coating?  I ordered mine from Chevy Duty.  Any "lessons learned"?
>
> It seems like I need to loosen the remaining rust and stuff in the tank
> before coating.  I though about dropping a few handfuls of clean pebbles
into
> the tank and gently roll them back and forth hopefully loosening up the
rust
> and stuff.
>
> Any experiences you've had would be much appreciated.
>
> Thx.
>
> Mike
> '56 Chevy Truck
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>