oletrucks
[Top] [All Lists]

Re: [oletrucks] TF Speedo Cable

To: "B&A Kettunen" <bekett@uslink.net>,
Subject: Re: [oletrucks] TF Speedo Cable
From: "Woods E. Houghton" <woodecindy@caverns.com>
Date: Sun, 16 Jul 2000 23:49:50 -0600
Could be a short cable or a striped Speedo gear.  There should be a bolt to
the side.   Pull the Speedo gear and look at it.  If it has excessive
replace it

woods
53 5 window
-----Original Message-----
From: B&A Kettunen <bekett@uslink.net>
To: Oletrucks Board <oletrucks@autox.team.net>
Date: Sunday, July 16, 2000 9:56 PM
Subject: [oletrucks] TF Speedo Cable


>How far should the speedometer cable on a 57 with a factory 4 speed stick
>out of the housing when it is set into the tansmission?  I'm having trouble
>getting the speedometer to work.  It works fine with a power drill (25 MPH
>with a 1/2 in drill at full speed chucked onto the transmission end) but
>doesn't work from the tranny.  I'm trying to figure whether there is
>something wrong in the tranny or if the cable is just too short.
>
>At least the Check Engine Soon light doesn't come on when the speedo
>doesn't work!
>
>Thanks.
>
>Bruce Kettunen
>57 3200
>Mt. Iron, MN
>
>
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>