You can I guess but you have to remember that if the residual pressure valve
is in the outlet ports of the master cylinder then the Disc Brake is set up
with only a 2 LB. valve and you need a 10 LB valve for the drum brakes.
Joe
-----Original Message-----
From: Deacon & Karen Magill <dnkmagill@bitstreet.com>
To: CHEVY TRUCKS <oletrucks@autox.team.net>
Date: Friday, January 19, 2001 8:59 AM
Subject: [oletrucks] drum brakes
>Hi When upgrading to a dual master cylinder without a booster and with
>drum brakes on front and rear can you use a cyl from a disc brake car
>or does it have to be from one with manual brakes? I think it has to
>be 1" bore or less and from a manual brake car, is that right?
>Deacon 55 sb
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|