oletrucks
[Top] [All Lists]

Re: [oletrucks] Steering column drop

To: "J Forbes" <jforbes@primenet.com>
Subject: Re: [oletrucks] Steering column drop
From: "JULIE HUBER" <JHUBER@alltel.net>
Date: Tue, 30 Jan 2001 21:22:41 -0000
i took a small block rod, cut it off a the required length, welded a bracket
to the cut off end ,to mount to dash.
rod cap to hold colum.
painted black. looks good.
Greg in Fla
56 short
-----Original Message-----
From: J Forbes <jforbes@primenet.com>
To: Old Trucks List <oletrucks@autox.team.net>
Date: Wednesday, January 31, 2001 1:34 AM
Subject: [oletrucks] Steering column drop


>I think the original drop on a 55-59 is made of
>painted steel...and it's almost 2" if you don't
>install the rubber insulator between it and the
>column.  You could probably do some minor cutting
>and welding to get it to exactly the right size, and
>fill in the shifter "hole" while you're at it.
>
>I built a tilt column using 1-3/4" exhaust tubing
>and a 68 Buick tilt column guts to put tilt in one
>of my 59s, the column looks much better than most
>tilt installations.  The aftermarket (iditit, etc)
>columns look real nice too, but they're kind of
>pricey for someone who is good at tinkering with
>that stuff.
>
>Jim F
>59s in AZ
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>