oletrucks
[Top] [All Lists]

[oletrucks] was 235/216, now "in the right place?"

To: oletrucks@autox.team.net
Subject: [oletrucks] was 235/216, now "in the right place?"
From: MarkNoakes@aol.com
Date: Thu, 29 Mar 2001 18:30:34 EST
A survey would probably show about 50-50 stock/modified, and some of us have 
one or more of each.  There's room for both.

Mark Noakes
Knoxville, TN
58/56 Chevy Suburban (modified)
59 GMC Suburban (stock)

But both in pieces. . .


In a message dated 3/29/01 1:24:32 PM, ed_gaito@webtrix.com writes:

<< I guess I'm in the wrong place too then?

-Ed G
1950 GMC (228)


----- Original Message -----
From: "Willard, Andrew" <andrew.willard@experian.com>
To: "Oletrucks (E-mail)" <oletrucks@autox.team.net>
Sent: Thursday, March 29, 2001 12:42 PM
Subject: RE: [oletrucks] 235/216, and some other questions


> We?
>
> I was under the impression we liked anything with a bowtie affixed to it.
> Stock or custom.
>
> Andy Willard
> Tustin, CA
>
> 89 S-10 (driver)
> 53 Panel (project)
>
>
>
> -----Original Message-----
> From: Gary L. Perry [mailto:glperry@fwi.com]
> Sent: Wednesday, March 28, 2001 10:47 PM
> To: Brian _; oletrucks@autox.team.net
> Subject: Re: [oletrucks] 235/216, and some other questions
>
>
> We like original trucks here. Stovebolt sixes have little value, usually
> around $100 or less, lots of people give them away 'cause their changing
to
> V-8 or newer six. More for the rest of us. Don't use Camaro frnt if not
> putting in V-8, would be pain in A** if keeping six.
>
> G. L. Perry
> Huntington, IN
> 54 Chevy 2-ton (driver)
> 50 Chevy COE (project)
> 55 GMC COE (project)
> MM Jet Star 3 (tractor)
>
> ----- Original Message -----
> From: "Brian _" <pkupman57@hotmail.com>
> To: <pkupman57@hotmail.com>; <oletrucks@autox.team.net>
> Sent: Thursday, March 29, 2001 1:29 AM
> Subject: [oletrucks] 235/216, and some other questions
>
>
> > the other day i asked this, but still havent gotten any responses.
> >
> > ok,
> >   216s had two nuts on the top of the valve cover, and 235s have 4 bolts
> on
> > the outside edge of the cover. right?
> >
> > now, which one is worth more/ or rarer? just currious.
> >
> > also, about how much is each one worth, compleat minus carb. with 3
speed
> > tranny, started, dist. etc
> >
> > would a '88 or '85 camaro clip work with a TF frame?
> >
> > this is for the GMC buffs; about what is the going price for a set of
> front
> > suspension dampeners from a '57 GMC? you know, the cylinder things that
> bolt
> > onto the front end with the same bolts the backing plates bolt to on the
> > spindle.
> >
> > bout how much would a good compleat set of 305 camaro heads minus the
> > rockers be worth?
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>
  • [oletrucks] was 235/216, now "in the right place?", MarkNoakes <=