In a message dated 4/28/01 7:03:04 AM Pacific Daylight Time,
tomntam@earthlink.net writes:
<< My TH350 transmission is hitting the floor pan in my 55 2nd TF. Is there
suppose to be some rubber spacers on the ends of the transmission mount that
will lower the transmission? As it is now the crossmember is bolted
directly to the frame and the top of the tranny hits the removable floor
pan. This is the way is was before because I can see on the tranny where it
was rubbing. Do i need rubber or would just some washer spacers work?
thanks for the help,
Tom Cooper >>
Hi Tom,
Is your tranny cover flat? If so, look for one that came from a 4spd
track, it'll have a hump in it, and should be what yuo need:)
Mike
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|