[Top] [All Lists]

Re: [oletrucks] Leaking Hedman headers!

To: "Don Simmons" <tasimmons@cbnn.net>, <oletrucks@autox.team.net>
Subject: Re: [oletrucks] Leaking Hedman headers!
From: "Michael and Stephany Zaic" <mzaic@athens.net>
Date: Sun, 29 Apr 2001 12:35:09 -0400
        I had no problem at all lining up the bolts after cutting the flanges.  
anything, it was a little easier because each tube could be moved
individually to insert the bolts. 
        As a side note, I also used locking bolts on mine.  If I remember
correctly, they are Stage 8 brand from Summit Racing.  They were a little
pricey at 35.00 for the big block, but worth it, in my opinion.  In the
current catalog, they run 32.00 for the small block.

Good Luck!
Michael Z.
Lawrenceville, GA
52 GMC 150
48 GMC 300
81 GMC Caballero
and a few others.

> From: Don Simmons <tasimmons@cbnn.net>
> To: Michael and Stephany Zaic <mzaic@athens.net>;
oletrucks@autox.team.net; 60schevy@topica.com
> Subject: Re: [oletrucks] Leaking Hedman headers!
> Date: Sunday, April 29, 2001 11:40 AM
> Did you have any trouble lining up the bolts after cutting the headers?
> Thanks,
> Don Simmons
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>