The track around the door opening is spot welded on. I would think you
could just spot weld it again or else use some small screws with a flat
head.
Terry Stellman
1949 3600
Missouri City, Texas
> -----Original Message-----
> From: Jon Kunkel [SMTP:jonkunkel@home.com]
> Sent: Monday, April 30, 2001 11:42 AM
> To: oletrucks mailing list
> Subject: Re: [oletrucks] Weatherstrip retainer to door
>
> Somebody must've tacked it on, as it should be screwed on. All retainers
> for rubber on the door are screwed on the bottom of the door.
>
> Jon 50 3104
> Chicago burbs
>
> ----- Original Message -----
> From: "Mark A. Self" <mark.self@verizon.net>
> To: "oletrucks mailing list" <oletrucks@autox.team.net>
> Sent: Monday, April 30, 2001 8:59 AM
> Subject: [oletrucks] Weatherstrip retainer to door
>
>
> > This channel is apparently spot welded in place. At least 2 of my spot
> weld
> > s are broken. What is a way to repair this? Would JB weld be strong
> > enough?
> >
> > ======================
> > Mark Self
> > '55 1st 5 window 3100
> > Redlands, CA
> > mark.self@verizon.net
> > "Sentimental Journey"
> > ======================
> > oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|