oletrucks
[Top] [All Lists]

Re: [old-chevy-truck] Re: [oletrucks] 3 to 5 win

To: "Bobby D Keeland" <bob_keeland@usgs.gov>, <oletrucks@autox.team.net>
Subject: Re: [old-chevy-truck] Re: [oletrucks] 3 to 5 win
From: "joe" <chevy1@jps.net>
Date: Thu, 7 Jun 2001 12:12:04 -0700
Hi Bobby,

Yeah I've taken the pictures of the 3 and 5 window and taped off how and
where I would graft the corner windows.

I just need to finish off the roll, have them developed and scan them into
the computer.

I have a few different ideas on mating the inner panels that will speed up
the process and reduce welding time.  I'll write up in a little article and
post on my website toward the end of the month.

Joe


-----Original Message-----
From: Bobby D Keeland <bob_keeland@usgs.gov>
To: oletrucks@autox.team.net <oletrucks@autox.team.net>
Date: Thursday, June 07, 2001 9:24 AM
Subject: RE: [old-chevy-truck] Re: [oletrucks] 3 to 5 win


>If I'm not mistaken in the article from the book "How to restore your
>chevrolet pickup" they replace the entire roof and back of the cab.  Joe,
>on this list, has been giving me advise on this swap and was going to tape
>off how he would do it and post the pictures somewhere (or email to
>interested parties).  I think that someone who knows what they are doing
>(unlike myself) could cut the hole in the outer sheetmetal a little larger
>than the hole in the inner sheetmetal using a template to make sure that
>the cuts on both cabs are the same (cutting outside the line on one cab and
>inside the line on the other) and make the final cab look like an original.
>Lots of people have chopped the top of their trucks and made them look
>good.  Check out a recent issue of Custom Classic Trucks (or was it Classic
>Trucks?) for an article on this.  Splicing in the corner windows should not
>be that much more difficult.
>
>Hey Joe, are you still thinking about the cut lines and splicing
>procedures?
>
>BobK
>51 3600 5-window (project)
>Arnaudville, LA
>
>
>
>
>
>                    "Jim House"
>                    <jhouse@ccsol.com>          To:
<old-chevy-truck@yahoogroups.com>,
>                    Sent by:                    <Pastorjon994@cs.com>
>                    owner-oletrucks@auto        cc:     "'OLETRUCKS'"
<oletrucks@autox.team.net>
>                    x.team.net                  Subject:     RE:
[old-chevy-truck] Re:
>                                                [oletrucks] 3 to 5 win
>
>                    06/07/01 06:42 AM
>                    Please respond to
>                    "Jim House"
>
>
>
>
>
>In one of the first books I purchased there is a demo of changing from 3 to
>5.  What they did is cut off the tops of both trucks and welded back on the
>five.  Above the windshield post in the front and below the windows in the
>back of the cab.  The book is "How to Restore Your Chevrolet Pickup" by Tom
>Brownell.
>
>NHJim
>45 Chevy 3104
>
>-----Original Message-----
>From: Don Slaney [mailto:ppm@dlcwest.com]
>Sent: Wednesday, June 06, 2001 11:20 PM
>To: Pastorjon994@cs.com
>Cc: OLETRUCKS; old-chevy-truck@yahoogroups.com
>Subject: [old-chevy-truck] Re: [oletrucks] 3 to 5 win
>
>
>Wow Jon, what a question, some on list seem to think it's possible. I just
>sold my 5 window today and had a last really look at the ole girl.
>
>Where the windows are, is double metal and it is recessed where the window
>and rubber seal fit.
>
>I guess it could be done, but never look like original. I would suggest to
>you to ask Mr. ADler if anyone would know, he would.
>
>Best regards,
>
>Don.1948 THRIFTMASTER 5 WINDOW 3/4 [AMERICAN]
>1951 1430  [1 TON] CANADIAN
>1951 1300  [1/2 TON] CANADIAN
>1966 FLEETSIDE  [1/2 TON L. Box] CANADIAN
>All Chevrolet
>and a
>1965 GMC [1/2 TON L. Box 910} CANADIAN
>
>Don Slaney
>REGINA BEACH, Saskatchewan,
>Canada.
>
>----- Original Message -----
>From: <Pastorjon994@cs.com>
>To: <oletrucks@autox.team.net>
>Sent: Wednesday, June 06, 2001 3:51 PM
>Subject: [oletrucks] 3 to 5 win
>
>
>> Has anyone ever cut in the corner windows to convert a 3 window cab to a
>5
>> win?  Can it be done?
>>
>> Jon Callahan
>> '50 3100
>> Champaign/Urbana, Illinois
>> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>>
>
>
>
>Ole Chevy and GMC trucks rule!
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>