The factory usually had some clamps on the back side of the front hood
support plate "where the hood latch attaches in front of the radiator.
That's how the wire passed from the drivers side to the passenger side
fender for the headlights and parking lights.
Joe
http://50chevy.freeservers.com/
-----Original Message-----
From: AKBurke <ajkburke@msn.com>
To: Oletrucks <oletrucks@autox.team.net>
Date: Saturday, July 14, 2001 10:56 AM
Subject: [oletrucks] Wiring harnes routing??
>Well, after all the procrastination I could muster I finally set to
>installing my wiring harness....got stumped pretty early...
>
>Q: How does the harness route to the right front fender area??
>through the radiator support in front of the radiator??....under the
>fan and back up??...over the radiator??
>
>(and No, I didn't take to old one out)
>
>Thanks,
>(this is the hardest part right?....tell me it ain't so ;-)
>-Andy
>'49 3104
>'49 3105
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|