oletrucks
[Top] [All Lists]

Re: [oletrucks] Engine Weights

To: "Steve Hanberg" <steve@OldSub.com>,
Subject: Re: [oletrucks] Engine Weights
From: "Bob KNOTTS" <raknotts@qwest.net>
Date: Fri, 25 Jul 2003 15:24:34 -0700
I'd like a mix of a little more power, plus stay away from the modern  (more
common) V-8's. Bob K

----- Original Message ----- 
From: "Steve Hanberg" <steve@OldSub.com>
To: "Bob KNOTTS" <raknotts@qwest.net>; "oletrucks"
<oletrucks@autox.team.net>
Sent: Friday, July 25, 2003 2:11 PM
Subject: Re: [oletrucks] Engine Weights


> Could be, but if ultimate performance is the goal you want a big V-8
anyway.
>
> ----- Original Message -----
> From: "Bob KNOTTS" <raknotts@qwest.net>
> To: "Steve Hanberg" <steve@oldsub.com>; "oletrucks"
> <oletrucks@autox.team.net>
> Sent: Friday, July 25, 2003 2:10 PM
> Subject: Re: [oletrucks] Engine Weights
>
>
> That's a thought. But I understand the 302 head "breathes" a lot better.
Bob
> ----- Original Message -----
> From: "Steve Hanberg" <steve@oldsub.com>
> To: "Bob KNOTTS" <raknotts@qwest.net>; "oletrucks"
> <oletrucks@autox.team.net>
> Sent: Friday, July 25, 2003 1:15 PM
> Subject: Re: [oletrucks] Engine Weights
>
>
> > Have you thought about buying a 270 and boring it out to 302?  I'm sure
I
> > read somewhere that someone had done that, and I don't think 270's are
> that
> > hard to come by.
> >
> > I know where one is near Portland that could probably be had for almost
> > nothing.  I know of another in central Washington that is for sale, but
my
> > impression is the guy actually wants to be paid for it.
> >
> > They are out there.
> >
> > ----- Original Message -----
> > From: "Bob KNOTTS" <raknotts@qwest.net>
> > To: "Bob KNOTTS" <raknotts@qwest.net>; "Thomas, Robert"
> > <RThomas@ButteCounty.net>; "Steve Hanberg" <steve@OldSub.com>;
"oletrucks"
> > <oletrucks@autox.team.net>
> > Sent: Friday, July 25, 2003 12:20 PM
> > Subject: Re: [oletrucks] Engine Weights
> >
> >
> > I'll probably stick with a 292 six. I'd rather go with a strictly GMC
> > engine, but it seems the 302's are going out of sight. Bob K
> >
> >
> > ----- Original Message -----
> > From: "Bob KNOTTS" <raknotts@qwest.net>
> > To: "Thomas, Robert" <RThomas@ButteCounty.net>; "Steve Hanberg"
> > <steve@OldSub.com>; "oletrucks" <oletrucks@autox.team.net>
> > Sent: Friday, July 25, 2003 10:55 AM
> > Subject: Re: [oletrucks] Engine Weights
> >
> >
> > > Thanks. The reason I was asking is I was wondering if it would be
> feasible
> > > to put a GMC 401 V-6 in a 1951- GMC pick up. I think the V-6's weighed
> > > 800-900 lbs. Bob K
> > >
> > >
> > > ----- Original Message -----
> > > From: "Thomas, Robert" <RThomas@buttecounty.net>
> > > To: "Steve Hanberg" <steve@OldSub.com>; "oletrucks"
> > > <oletrucks@autox.team.net>
> > > Sent: Friday, July 25, 2003 10:04 AM
> > > Subject: [oletrucks] Engine Weights
> > >
> > >
> > > > Gents:
> > > >
> > > > In response to "What does a big block ( 454) Chevy engine weigh?
That
> > > > is, with accessories? Thanks. Bob K"
> > > >
> > > > Try this link:  http://www.classictruckshop.com/engine_sizes.asp
> > > >
> > > > You will find the following information set out in a more read-able
> > > > form.
> > > >
> > > > Engine Measurements
> > > > C.I.D. Width Length Height Weight Sump Location Starter Location
> > > > Chevrolet
> > > > 262-400 26" 28" 27" 575 lbs. Rear Right
> > > > 396-454 28" 30.5" 29" 685 lbs. Rear Right
> > > > Ford
> > > > 221-351W* 24" 29" 27.5" 460 lbs. Front Right
> > > > 351-400 C/M 24.5" 29" 28.5" 550 lbs. Front Right
> > > > 429-460** 27" 30" 29" 720 lbs. Front Right
> > > > 352-427 FE# 27" 32" 29" 625 lbs. Front Right
> > > > 4.6L SOHC 28.7" 28" 26" 600 lbs. Front Right
> > > > 4.6L DOHC 30" 28" 30" 576 lbs. Front Right
> > > > Chrysler
> > > > 273-360 24" 29" 27" 550 lbs. Front Left
> > > > 361-440 29.5" 30" 29" 670 lbs. Front Left
> > > > 426 Hemi 29" 32" 32" 690 lbs. Middle Left
> > > >
> > > >  *  351W height to carburetor pad is 23.75", 289-302 height to top
of
> > > > pad is 20.75".
> > > >      Length for all is with short serpentine water pump
> > > > **  Except Boss 429
> > > > #   Except 427 SOHC
> > > > D  Width is valve cover to valve cover. Height is to top of valve
> > > > covers.
> > > > oletrucks is devoted to Chevy and GM trucks built between 1941 and
> 1959
> > > oletrucks is devoted to Chevy and GM trucks built between 1941 and
1959
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>