oletrucks
[Top] [All Lists]

[oletrucks] 1st time painter's question

To: oletrucks@autox.team.net
Subject: [oletrucks] 1st time painter's question
From: Mikecdk@aol.com
Date: Thu, 25 Sep 2003 22:02:31 EDT
Folks,

OK I've read a ton of books and talked to my auto body materials 
supplier...but its a dead even split....so here's my question!

I have my '46 Chevy cab sanded down to bared metal (36 grit, then 80, then 
150)....do I put the filler on where needed first? or the etching primer?  

This is my 1st attempt at the body work so please make your advice simple!  

Thanks!
Mike
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>