[Top] [All Lists]

[oletrucks] ignition wire

To: oletrucks@autox.team.net
Subject: [oletrucks] ignition wire
From: Claude <cramey@earthlink.net>
Date: Sun, 12 Oct 2003 10:54:24 -0500
I put an HEI distributor in the '59 with a 283. I took out an old wore 
out points distributor. It's a close fit, but is in and not touching the 
firewall. Where/how do I get a Batt. lead that is hot when cranking and 
in the run position? I know I need to bypass the resistor but the old 
wire seems to have batt. in the run position but not in the start.

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>