I am doing my doors down to bare metal and would love to hear some prep
suggestions as well.
Wayne - '47 1 Ton Panel
----- Original Message -----
From: "Tom C." <email@example.com>
To: "Oletrucks" <firstname.lastname@example.org>
Sent: Friday, October 24, 2003 6:04 AM
Subject: [oletrucks] a few POR 15 questions
> Would it be ok to use POR 15 on the inside of the backing plate where the
> brake shoes are mounted?
> Also if I use POR 15 on bolts (such as the bolts that hold the axel on to
> the backing plate) would that ruin them or will they still go on and off
> when needed?
> One more thing...I am using a wire cup brush to clean the rear end and it
> doing a good job. POR 15 manufacturer says to use their metal prep if all
> the rust is removed to the metal, has anyone used another metal prep with
> any success?
> Thanks for all the help
> 55 2nd
> 97 S-10
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959