[Top] [All Lists]

Re: [oletrucks] POR 15

To: Dennis Larson <DLLarson1@frontiernet.net>
Subject: Re: [oletrucks] POR 15
From: zman <zman@gibbon.kungfumonkey.com>
Date: Fri, 24 Oct 2003 15:01:47 -0400 (EDT)
On Fri, 24 Oct 2003, Dennis Larson wrote:
> I"ve used POR 15 quite a bit.  It's great stuff.  Just wear gloves when you
> use it unless you want to wear it for awhile.  DO not put it on threads of
> bolts.  Heads would be ok.  It will not ever come off if put on correctly.
> When cleaning an area for application do not take all the rust off.  IF the
> metal is to clean it won't stick.  It's expensive but good.  Poor what you
> think you will need into another container, and you cannot pour it back.
> Keep the lid groove on the can clean and when thru place some cellophane over
> the top of the can first then put the lid on.  I"ve been told to turn the can
> over and store it on its lid after being opened.  The shelf life of a
> previously opened can is not that great, a month or 2 so try to use it all up
> quicklly.

This is why I buy the multi pack, then I have a few small containers of it 
rather than one big one. Works better for me. 

Scott H. Zekanis
1957 Buick Riviera Hardtop (2 dr., 364" Nailhead)
1959 GMC in Chevy Sheetmetal 1/2 Ton (235" Inline 6)
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>