----- Original Message -----
From: "Ryan Sain" <rsain@gte.net>
To: "oletrucks" <oletrucks@autox.team.net>
Sent: Tuesday, November 17, 1998 7:39 PM
Subject: Re: [oletrucks] Floor patchpanel
> Hennie,
>
> I have recently purchased items through Brothers.
>
> I ordered and received a set of cab mounts and dash smoothing panel.
>
> The dash panel is sheet metal and it fits perfect. Thickness was a little
> thinner than original (or so it seemed; I didn't measure with a caliper).
> The items arrived promptly and were packed very well (i.e., no damage).
>
> Cab mounts were perfect.
>
> No complaints here.
Thanks, normally it isn't a big problem when i order something not to
expensive, and it turns out to be worthless, but i live in Holland (Europe)
and the price with shipping and all is huge (no to mention the long wait)
There are dealers in US oldtimer parts overhere, but the prices usually are
doubled, and the parts are mostly used or the wrong type.
Hennie van Dalen
www.chello.nl/~h.vandalen11
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|