On Thu, 25 Dec 2003, Steven Stuckmeyer wrote:
> I'm wanting to re-gear the rear end that will be going into my '51 3100. I
> have a 12 bolt GM rearend from a 70 Nova. Presently it has a 4.56 ratio
>ring & pinion, #'s 30-7076 (or 8)-1, with what looks like a spacer. It
>has a limited slip with #'s EDB80140 on it. Is this a Moroso unit, and
>may it be used with a 3.73 gearset? Any help would greatly be appreciated.
> Thanks for any info on this.
12-bolts have 3 different carriers, one for gears in the 4's one in the
3's and one in the 2's. Your going to need a carrier for those 3 series
gears or go with as close to a 4 as you can get, I believe you can run
3.90's on the 4 carrier.
--
Scott H. Zekanis
zman@kungfumonkey.com
http://www.rod-o-rama.com
http://www.thehellbenders.com
1957 Buick Riviera Hardtop (2 dr., 364" Nailhead)
1959 GMC in Chevy Sheetmetal 1/2 Ton (235" Inline 6)
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|