I think the clips are to keep it primarily from rubbing up again the hole
that the hose/hard line runs through. If the clip is not there, the
abrasive action of the hard line or hose flapping against the hole would
eventually wear a weak point in one or the other and that could be a
At 12:29 PM 10/17/04 -0400, Alan Horvath wrote:
>>Are the clips that secure the brake hoses to the frame mounts supposed to
>>hold the hose tight? Mine clip on to the hose, but the hose is fairly loose.
>That's how mine are, Bill.
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959