Scott
I put in angled shims from a 4x4 parts store to correct the pinion angle!!!
Rob The ToonMan
----- Original Message -----
From: zman<mailto:zman@shell.neverwhere.org>
To: Rob Butler The ToonMan<mailto:Squatch56@msn.com>
Cc: Z1 Wayne Osborne<mailto:wayne@chevytrucks.org> ; Z
OLETRUCKS<mailto:oletrucks@autox.team.net>
Sent: Monday, February 14, 2005 6:45 AM
Subject: Re: [oletrucks] rear springs
On Sun, 13 Feb 2005, Rob Butler The ToonMan wrote:
> On the TF trucks you can also remove the rear ends front spring hanger,
and
> flip it to the top of the frame. You have to notch it a bit but it gives
> quite a drop. I did it on my 56 Cameo and it worked GREAT!!!! I have a
Pic
> of it done if anyone wants to see it.
Don't forget to check what this does to your pinion angle.
Scott H. Zekanis
zman@kungfumonkey.com<mailto:zman@kungfumonkey.com>
http://www.rod-o-rama.com<http://www.rod-o-rama.com/>
http://www.thehellbenders.com<http://www.thehellbenders.com/>
1957 Buick Riviera Hardtop (2 dr., 425" Nailhead)
1959 GMC in Chevy Sheetmetal 1/2 Ton (235" Inline 6)
1990 Ducati 750 Sport
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|