Unless your combustion chambers are a lot bigger than mine, a cupful of
water is enough to do some damage, if it goes in all in one slug. (9:1
CR in a 3.0 6-banger = 62.5 cc, which is about 1/4 cup.)
Dave Williams wrote:
>
> -> Be VERY careful to dribble SLOWLY if you try the procedure listed
> -> below. If you get too much water in any one cylinder you get a
> -> hydraulic lock.
>
> In practice you'd be hard pressed to feed in enough water to hydraulic
> a motor. You'd need a bucket or a hose with a pretty good stream to do
> it.
>
|