NAPA Exhaust Systems - muffler and pipe sealing compound #35959
Larry Hoy
On Tue, 16 Oct 2001 18:51:24 +0100, Neil Sherry wrote:
>
>Hi there!
>
>I am fabricating a new exhaust system for my turbocharged Sprite. I would like
>a joint that will be (more or less) gas tight, but will come apart when I want
>it to. Due to lack of ground clearance I don't want to use a conventional
>flanged joint, and am intending to use a slip together joint with clamp screw
>(I will split the outer pipe and weld a pair of 'ears' either side of the
>split - through which will be a bolt to close the split up).
>
>So now the question. What can I use in the joint (ie between the two well
>fitting mild steel pipes) to stop the whole lot corroding together?
>
>Neil
///
/// shop-talk@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe shop-talk
///
///
|