On Tue, 14 Dec 2004 08:33:24 -0500, Eric@megageek.com <Eric@megageek.com> wrote:
> OK, I've spent the last 2 nights working on installing the 10k lbs Bendpak
> Asymtrical lift in my shop.
> I've got 6" of 4500psi concrete. Here is the deal. I drilled the holes in
> the floor and 2 of them are off (these are 3/4" holes for the dropin
> bolts.) I was wondering if anyone knew if I could drill out the holes to
> maybe 1" and then using the proper grout, refill them with the bolts in
> place. Let it set for a few days, then torque the bolts down.
> Anyone know if I can do that? Thanks.
I'd call the manufacturer or sales agent for the lift, and ask them.
You can't possibly be the first person to drill the holes wrong.