Although the battery cable -> starter cables may look OK and feel tight it
is a Good Idea to remove, clean & secure each one. The starter is a big
current draw. One iffy connection (or a few slightly iffy connections) can
prevent enough electrons from being able to flow to operate the starter.
Even if it still proves to be a bad battery or another component
cleaning/securing all connections is not time wasted (and no money is wasted
either!).
Eric Russell
Mebane, NC
http://home.mebtel.net/~ejrussell
----- Original Message -----
> hooked the battery charger to the battery and put it in start mode
> 120amp... and I still get the 5 or 6 clicks from the relay but have
> confirmed that each click does actuate the bendix but the bendix will not
> stay engaged...
>>> the battery is charged 13.6 volts at the starter terminals.. all
>>> connections are tight.
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|