Michael,
a 460 will weigh in between 700 and 800 #s fully dressed... a 1250# stand
will certainly hold it but depending on the rotating part... turning it
might be difficult... that's why I built one... I'd stay away from 3
legged stands (or T-bases... that aren't that stable...
john
----- Original Message -----
From: "Michael Burdick" <burdickm at mindspring.com>
To: "ShopTalk" <shop-talk at autox.team.net>
Sent: Tuesday, June 14, 2011 9:08 AM
Subject: Re: [Shop-talk] Engine stand for Ford big block
>I need to rebuild the engine in my truck, and am looking for guidance
> on engine stands. The engine is a '93 7.5L (460ci) big block - cast
> iron block and heads.
>
> I have a generic 3 wheeled stand (750 lb rating?) that supported a
> Stag engine, but it seemed to be pretty close to it's working limit as
> the engine bounced around a lot as I was working on it, and I worried
> about tipping over when rolling it around. I'm considering a folding,
> 4 wheeled 1250lb stand from Northern with a geared head. Is that
> going to be sufficient?
>
> Thanks in advance for any input,
>
> Mike Burdick
> Durham, NC
> _______________________________________________
>
> Shop-talk at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/jniolon at bham.rr.com
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1382 / Virus Database: 1513/3703 - Release Date: 06/14/11
|