shop-talk
[Top] [All Lists]

Re: [Shop-talk] Shop question (but wood working)

To: <eric@megageek.com>, <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Shop question (but wood working)
From: darmstrong@nexicom.net
Date: Thu, 24 Nov 2011 10:58:47 -0500
Is the block open at the bottom?  What about removing the blade from a 
hacksaw / large coping saw & reassemble it through the slot.  Cut a 
few slots and remove them with a homemade chisel.  From a screwdriver 
perhaps?

Doug Armstrong



On Thursday 24/11/2011 at 10:43 am, eric@megageek.com wrote:
> I'm not sure if a wood working question is appropriate here, so let me
> know if I'm stepping outside the allowed content.
>
> I'm sure someone here has an answer however.
>
> OK, I have a nice knife block with knife set. One of the knives was
> replaced with a better one. The problem is that the new knife doesn't 
> fit
> in the slot on the block.
>
> Does anyone know how to cut/expand one of those slots in a block of 
> wood.
> I need to go about 7" deep?
>
> Failing any other solution, I was thinking of cutting the block in 
> half
> with a bandsaw, routing the slot, then gluing it together. This is not 
> my
> first choice however.
>
> Thanks guys and have a happy thanksgiving!
>
> Eric P
> "Be as beneficent as the sun or the sea, but if your rights as a 
> rational
> being are trenched on, die on the first inch of your territory." Ralph
> Waldo Emerson
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/shop-talk/darmstrong@nexicom.net
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>