shop-talk
[Top] [All Lists]

Re: [Shop-talk] HF Predator engines

To: old dirtbeard <dirtbeard@pacbell.net>, Shop Talk List <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] HF Predator engines
From: Brian Kemp <bk13@earthlink.net>
Date: Sat, 30 Nov 2013 10:30:37 -0800
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=dk20050327; d=earthlink.net; b=YI64+EeodSQdGhzX0k6xsoKRtsDAWp2cFrWi5tvYSIG6YP5ZlaHkK2TKibI9an1p; h=Received:Message-ID:Date:From:User-Agent:MIME-Version:To:Subject:References:In-Reply-To:Content-Type:Content-Transfer-Encoding:X-ELNK-Trace:X-Originating-IP;
References: <52995CEA.7020605@gmail.com> <529965F2.6090708@earthlink.net> <529A0B5A.1020408@nashvilletn.org> <1385830060.16108.YahooMailNeo@web180901.mail.ne1.yahoo.com>
User-agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.1.1
Doug - Thanks for the reference.  Unfortunately my carb, B&S 495652 is 
discontinued, and the best price so far is $46 plus shipping.  There may 
be a replacement, but http://www.briggsandstratton.com doesn't even 
recognize their own part number.  It has been thoroughly cleaned, but 
the gas was old and is the special California formulation that makes for 
lower emissions (and less energy content).  I have new gas to try, but I 
also have kids with lots of activities and a job that gets in the way.

It had a shutoff valve that had the rubber all dissolved - plugged till 
I used carb cleaner, then free flowing.  I have a replacement for $4 to 
install.

Brian



On 11/30/2013 8:47 AM, old dirtbeard wrote:
> Guys,
>
> I know that B&S carbs are very simple devices and should be easy to
> repair, but how much could a replacement carb cost in comparison to replacing
> the engine?  Here is a new one for $25 (probably not the one you need, but it
> gives an idea):
>
> http://www.ebay.com/itm/like/230961079704?lpid=82
>
>
> With the
> advent of synthetic oil, it is very hard to wear out one of these engines if
> the oil is changed yearly and the air filter is in place and tight.
>
> It also
> would be nice to have a complete, new carb on hand for comparison.  It
> probably also would be fitted with seals that are designed for alcohol laden
> gasoline.  In the spirit of "shop talk,"I think I first might try putting in a
> gas shut-off valve and a new carb.
>
> best,
>
> doug
> ________________
> '72 BSA
> B50SS
> '74 Moto Guzzi 850T
>
> '01 HD XHL 883
> '03 GMC Cargo Van
> '07 Aprilia SXV
> 550
> '13 Aprilia Tuono V4R
_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>