shop-talk
[Top] [All Lists]

Re: [Shop-talk] 4-post lift thoughts

To: Paul Parkanzky <parkanzky@gmail.com>
Subject: Re: [Shop-talk] 4-post lift thoughts
From: Brad Kahler <bkahler1@gmail.com>
Date: Wed, 14 Jan 2015 14:32:54 -0500
Cc: Shop Talk List <shop-talk@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
References: <CADm3DLGc1M5snbydp3COnVYWeJuFs1A7fMqDMROctBLvkfwTmw@mail.gmail.com> <D972D971-C0B0-4575-A647-65A0B18E9CFD@verizon.net> <CADm3DLEnSvrwwag2n=BMZezsyeptOaAxz1NqJ-cxuZmCiVvrfw@mail.gmail.com> <CAOEriincpGWja-YNgdtHWv9yT8FMt9mW0-98SUhX_L7=dtAFKg@mail.gmail.com> <CADm3DLHMtd7w32OOVMhDinXV9iJ-wj3oW_xE-Vx3AgOrbZ7WBQ@mail.gmail.com> <54AB70B2.4070404@earthlink.net> <CADm3DLHhia1RvBO8kKf2dfPPSD1EAVaJFOz7Q1h+k+8PoX49tA@mail.gmail.com> <CA+k5supawYgXn4nM2_wV3YwOgwC-YqA2E0q0-ebUnWLZ42tZ6w@mail.gmail.com> <CADm3DLED_ROL8aDaYdonPyQ8Di8RPE3VA3M21U31uPkwGeZd0g@mail.gmail.com> <CAOEriikw3pPhiqLu53F+xB1ypUnJV9woMATMdY_RBv=TiHpxig@mail.gmail.com>
Paul, the style shown in the link won't work for my lift as my platforms
hook over the beams blocking any place to hook the ramps.

However the ones Larry Spector is referring to would definitely work.  The
attachment method is simpler than pins and the fab shop down the road can
easily bend some aluminum diamond plate for me that should work just fine.

Thanks guys!

Brad




On Wed, Jan 14, 2015 at 2:20 PM, Paul Parkanzky <parkanzky@gmail.com> wrote:

> The ramps on my lift "hook" on the cross-member.  I don't see the need for
> pins, since gravity will do the job of holding them down.  Here's a link to
> optional Aluminum ramps for my lift.  I don't recommend a $300 set of Al
> ramps, but they'll give you an idea of how they work:
>
> http://www.gregsmithequipment.com/Aluminum-Approach-Ramps-pair
>
> -Paul
>
> On Wed, Jan 14, 2015 at 2:15 PM, Brad Kahler <bkahler1@gmail.com> wrote:
>
>> Ok, next issue with the 4-post lift.  The in-feed ramps on my lift were
>> fixed ramps (welded to the platforms) and were only about 16" long.
>> That.......
_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>