shop-talk
[Top] [All Lists]

Re: [Shop-talk] 1/2 socket drive adapter for power auger?

To: Jim Franklin <jamesf@groupwbench.org> definitions=2020-06-12_17:2020-06-12, 2020-06-12 signatures=0 malwarescore=0 phishscore=0 bulkscore=0 spamscore=0 clxscore=1015 mlxscore=0 mlxlogscore=999 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-2004280000 definitions=main-2006130016
Subject: Re: [Shop-talk] 1/2 socket drive adapter for power auger?
From: Pat Horne <patintexas@icloud.com>
Date: Fri, 12 Jun 2020 21:17:47 -0500
Cc: shop-talk <shop-talk@autox.team.net>
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
References: <843E2224-7254-4161-A31F-F7A408AC685E@groupwbench.org>
How about welding the socket to a piece of pipe that will fit over the auger 
shaft.?

Iâ??d be a bit concerned that the auger would pull out of your hands unless it 
has a clutch. 

Peace,
Pat

Pat Horne 
We support Habitat for Humanity


On Jun 12, 2020, at 8:28 PM, Jim Franklin <jamesf@groupwbench.org> wrote:

I'm going to drive in some small augers & plates as deck footings (Titan 
deck foot). They came with a 1/2" drive impact socket. Rather than buy a corded 
impact wrench that I will likely never use again, a friend has offered to loan 
me his Harbor Freight power auger he bought for post hole digging. It has a 
7/8" round shaft with a pin through it that drives the auger. I'd like to adapt 
that to the impact socket but I can't find an adapter. Am I Googling wrong or 
is that something that likely doesn't exist?

thanks,
jim
_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/shop-talk/patintexas@icloud.com

_______________________________________________

Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive

Unsubscribe/Manage: 
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>